Hot Products
600-type PCB board shredder
In the harmless treatment of hazardous waste and industrial solid waste, shredding is essential to reduce volume and facilitate processing and combustion.
Shredders are available in 600, 800, 1000, 1200, 1500, and 2000 models, with prices ranging from over 20,000 to hundreds of thousands of yuan. Larger models can reach around 500,000 yuan. Naturally, the larger the model, the larger the material that can be shredded, and the greater the output. If your output is not too high or the material to be shredded is not too large, an 800-type shredder is sufficient.
Applicable materials for shredders: films, woven bags, fishing nets, plastic buckets, plastic toys, and many other materials; suitable for recycling and shredding waste agricultural film, packaging film, greenhouse film, ton bags, space bags, food bags, cement bags, waste fishing nets, plastic buckets, and other raw materials. In this processing method, waste plastic materials are directly fed into the shredder via a conveyor. The motor drives the main shaft, which is then driven by a reducer. N moving blades mounted on the main shaft and fixed blades mounted on the frame shred the bundled material, separating the plastic from impurities (stones, metals, etc.). The entire machine is fully automated, requiring only one operator, and offers stable output.
The working principle of a dual-shaft shredder: The main component of the dual-shaft shredder is a rotor with two spirally arranged blades. The motor, after being reduced in speed by a reducer, obtains a large torque, driving the two rotors to move towards each other. During this movement, the blades on the rotors bite into the material, pulling it into the blades where they shear and pull against each other, achieving the effect of shredding the material. Dual-shaft shredders have low speed and high torque, making them suitable for shredding various materials. Depending on the industry, dual-shaft shredders are mainly divided into: metal shredders, plastic shredders, wood shredders, industrial solid waste shredders, municipal solid waste shredders, construction waste shredders, etc., featuring wide applicability, low noise, and no dust. The fineness of material shredding by a dual-shaft shredder is related to the thickness of the shredder blades and the number of teeth. Thinner blades produce smaller shredded materials, while more teeth result in shorter shredded material.
Recently, with frequent rainfall in various regions, waterproofing and moisture-proofing of wood shredders are crucial in humid weather. Water ingress into the wood shredder can significantly impact production, causing issues such as rust and, in severe cases, shortening the shredder’s lifespan. Therefore, waterproofing and moisture-proofing raw materials is extremely important. Special attention should be paid to waterproofing both equipment and raw materials during rainy weather. Why do we repeatedly emphasize preventing raw materials from getting damp? Firstly, the raw material processed by wood shredders is primarily wood, which is highly absorbent. Even without direct water contact, moisture can significantly increase its moisture content. During normal operation, wood shredders are better suited for shredding brittle materials than tougher ones. Forcing the shredder to shred unsuitable materials will cause irreversible damage.
Shredders are designed to shred various metal products and waste furniture materials. They are primarily used for shredding non-recyclable metal materials, such as scrap metal, scrap corrugated steel sheets, scrap metal, scrap wood, rubber tires, decorative furniture, waste mattresses, sofas, and various plastics that require shredding.
The materials processed by the scrap steel shredder are high in density and purity, with virtually no impurities. The shredder is low-noise, pollution-free, and has high crushing efficiency, producing fine, uniform particles. It offers a full range of models, stable performance, high efficiency, and good quality. Free design and installation are provided. Prices for scrap steel shredders vary in the market.
Headboard shredders utilize European technology and are mainly used in the plastics industry for shredding and recycling various thick-walled waste materials and scraps. They are suitable for extra-thick, tough, and large materials (extra-large headboards, large plastic pipes and fittings, large-diameter thick-walled PE pipes, etc.). This machine can effectively shred plastic packaging drums, large bundles of plastic film, large bundles of ton bags, woven bags, roll film, paper, fibers, forklift pallets, etc., and is suitable for shredding and recycling various materials such as plastics, rubber, and wood.
The waste cable and wire shredder can shred waste cables, wires, copper wires, and aluminum wires, recovering pure copper wires or copper granules through a cable recycling production line. Waste copper is a recyclable precious metal used in cables, wires, electronic products, and motherboards. Recycling these waste copper wires usually requires a wire shredder to separate the plastic and copper, producing fine and uniform copper granules.
As a shredder manufacturer, Xrido Machinery may not be the best, but it’s very suitable for everyone. Why? Our equipment is not only of qualified quality, but more importantly, the price is very affordable. If you want to buy a high-quality, low-priced plastic shredder, then Xrido is an excellent choice.
